DF/Q-XE/XG valves actuators DF/Q-XE/XG valves actuators

DF/Q-XE/XG valves actuators

FOB Price:
USD 1 / Piece
Min.Order Quantity:
1 Piece
Supply Ability:
10000 Piece per Year
Port:
Ningbo or Shanghai
Place of Origin:
China
Payment Terms:
T/T
Brand:
Hengsen
Products Model:
DF/Q-XE/XG
Share:
  • Products Details

Quick Details

  • Brand Name: Hengsen

    Model Number: DF/Q-XE/XG

    Place of Origin: China

Packaging & Delivery

  • Packaging Details: 1
  • Delivery Detail: 1

Specifications

Product introduction

The DF/Q-XE (XG) series actuators are the products of one kind of electron machine, matched with the DF/F series valve, and other valves by the linker.

 

Feature 

  1. It can be installed simply and swiftly
  2. Forward and inverted direction
  3. With the end control
  4. Exact location
  5. The synchronous motor
  6. The antisepsis design
  7. With a manual exerciser
  8. It is suit for the journey of 38mm
  9. It doesn’t need maintenance
  10. Signal feedback:0-10V dc/2-10Vdc
  11. Input option: 0-10V /2-10V; 4-20mA/0-20mA.
  12. No need of link rod

 

Notes 

  1. When repair the actuator, the current must be cut off to prevent damaging the machine or hurt.
  2. Do not connect or take down the wire when the power is on.
  3. The actuator should be prevent from water to avoid damaging the parts inside and motor.

The actuator should not be covered by the heating insulating material.

 

Operation 

The actuator is actuated by the 2-way synchronous motor. When the valve is open or closed, it will generate the counted force for the driver that can turn off the microswitch inside and the driver will stop working. When the driver receives the control signal, the valve will open a little and stop at any position without signal. The signal sent out by the increasing or proportional controller of the actuator can make the motor running clockwise or anticlockwise.

  1. Set the actuator bracket on the brass valve connector, and tighten these screws by hexagonal spanners of 4mm.
  2. Maintain it in the front of axial lever lid’s stationary clamp.
  3. Put the valve lever into its gap.
  4. Loose the clamp and fasten the lever lid.
  5. Make sure the clamp holds the lever lid.

Lift the knob, loose the actuator’s housing screws, and open the actuator’s lid. Then install according to the wiring diagram.

Specification and technical data

Type 

DF/Q-XE-M

DF/Q-XG-M

Power

No more than 12VA( when 24VAC)

Signal source output resistance

Protecting degree

IP54

Character

24VAC±10% 50/60Hz

The thrust of valve plug 

1000N

3000N

Journey 

22mm

40mm

Material 

Gear: stainless steel, brass

Reducer Board: galvanized steel

Bracket: Die-casting Aluminum Alloy

Housing: inflaming retarding ABS engineer plastic

Journey time

105 seconds when 50Hz, 90 seconds when 60Hz

Temperature

Ambient temperature: -10~+50℃; storage temperature: -40~+50℃

Humidity 

1%-95% RH   NO dew

Flow temperature

<150℃

Weight 

2.4Kg

 

 

 

 
  • Email to this supplier
  • To :
    Hengsen Group - Mason  |  Zhejiang Hengsen Machine-Electrical Co., Ltd
  • *Subject :
  • Quantity Order:
  • *Message :

  • Your message must be between 20-2000 characters
  •  Please enter your company name:

    Please make sure your company name is entered correctly.

  • * Please enter your email address:

    Please make sure your email address is entered correctly.

  • * Please enter your mobile phone:

    Please make sure your mobile phone is entered correctly.

Verified Supplier - Zhejiang Hengsen Machine-Electrical Co., Ltd Bussiness Type:  Manufacturer
Scale:  301 - 500 People
Country/Region:  China (Mainland)/Asia
Established:  
You May Like:
DQF-D  motorized valve

DQF-B motorized valve

DQF-B-24V-CAP motorized valve

DQF-LB  motorized valve

DGQF-B motorized ball valve

DF-01 split-type motorized valve

DF-02 split-type motorized valve

DF/F-05 motorized valves

DF/F-06 series screw cast brass valves